X-ray Baggage Scanner GS6550

X-ray Baggage Scanner GS6550
Product Details

X-ray Baggage Scanner GS6550(Medium Tunnel Size)

Model: GS6550


With a 650 mm wide by 500 mm high tunnel opening, the X-ray baggage inspection sysstem GS6550 provides outstanding threat detection and a low total cost of ownership. The GS6550’s innovative design allows for bi-directional operation, while ergonomic options such as its adjustable control panel stand make it easy to operate. 

Advanced single view checkpoint screening system with outstanding features and innovative options. Proven Checkpoint Screening Performance


  • Explosive and Narcotics Detection 

  • Alert Ergonomic Design 

  • Network Enabled 

  • Performance and Value

X Ray Baggage Scanner


1. One-button shutdown: turn off only need to turn the key, the device automatically safe shutdown, more humane.

2. Emergency stop hierarchical control: press the tight stop button, only the power transmission and ray source part, more secure.

3. Image ultra-clear: the core components of high-density imported modules, higher resolution, to the international level, more clear.

4. Waterproof function: the channel within the special treatment,there is no effect a small amount of passengers scattered liquid, more at ease.

5. self-diagnosis: automatic fault diagnosis, and give a message, easy to maintain.

6. zoom function: continuous mouse zoom function, more continuous. Unique mouse magnifying glass function, any local details zoom, more accurate. Has a specific role in identifying specific explosives.

7. Detection of objects: parcels, small bags, suitcases, bags and other large objects.


Electrical appliances with reference to EN60950 safety standards

Radiation is carried out with reference to EN50081-1

Strict implementation of the current X-ray security equipment national standards

Fully through the ISO14001: 2004 environmental management system certification

Fully through the OHSAS18001: 2007 occupational health and safety management system certification

Fully passed ISO9001: 2000 quality management system certification


Dimensions: 2040 (length) x920 (width) X1300 (high) mm

Channel Size: 650 (W) X500 (H) mm

Conveyor speed: 0.22m / s

Conveyor max load: 170kg

Resolution: diameter 0.07871mm metal wire

Spatial resolution: horizontal diameter 1.0mm; vertical diameter 1.0mm

Penetration: ≥10-48 mm steel plate

Film safety: Safety for IS01600 film

Leakage dose: <0.1uGy / h

Working environment: -20 ° C ~ + 60 ° C / 20% ~ 95% (no condensation)

Noise: ≤ 55dB (A)

Working voltage: 220VAC (± 10%) 50 ± 3HZ

Power consumption: 0.6KVA (0.6 kWh per hour)

 X-Ray Generator Specifications

Radial beam direction: Vertically Upward

Anode current: 0.4-1.2mA 

Anode voltage: 100-160KV 

Radiation beam divergence angle: 80 °

Cooling / working cycle: sealed oil cooled / 100%

 X-ray Image Processing

Array Detector: L-type photoelectric diode single-energy detector

Monitor: High resolution 19 inch LCD monitor

Color quality: Image display 24-bit color display, 12bit depth

Edge enhancement: the edge of the object contour is more clear

Super image enhancement diagram: image detail is clearer

High penetrate strength display:  increase brightness of dark area in image to display object which is behind high absorbtivity mass distinctly

Low penetrate strength display: increase contrast of low absorbtivity mass (easy to penetrate) to display it distinctly

Brightening / Darkening: Increases the brightness of the image / darkens the brightness of the image

Image recurrence: display previous thirty images and process any one of them

Image restoration: restore image to initial status at the time of stopping conveyor

Image storage: Save 500,000 images continuously and process them


  • Entry / exit rollers of various length

  • Operator’s desk

  • Set of test objects

  • Two monitor functionality

  • Touchscreen operation functionality

  • Uninterruptible Power Supply

Radiation Safety

The design of the system provides radiation leakage attenuation limited to 1,0 µSv/hr (0,1 mR/hr) or lower at any accessible point at the distance of 0,1 m [ 3.9" ] from the external surface of the system. The dose rate intensity at the workstations of the personnel does not exceed 1,0 µSv/hr.

Maximum inspected item radiation dose during a single scan is 0,16 µSv, and is safe for the films with sensitivity up to ISO 1600 (33DIN).


Automatic identification

Algorithms used in software enable automatic highlighting of such objects as weapons, explosives, narcotics, as well as opaque areas, where dangerous object may be concealed.These functions improve operating efficiency.Automatic gun detection software can detect standard pistols and revolvers of the small size and weighting minimum 300 g. The automatic evaluation function marks dangerous objects in the images displayed to the operator in real-time mode.

Quick start up and shutdown

Due to the new configuration of hardware the system becomes ready for operation within 30 seconds. Instant shutdown of the system is now also possible.

The set of self-intuitive tools and settings make it possible for the operator to master the system control quickly and easily making thus his/her daily work more comfortable.

Real time self diagnostics

State of all important assemblies and components is controlled in the on-line mode allowing the system to be kept operational and the operator to be informed about any changes in good time.

Fault tolerant configuration

A special configuration of the Operator’s Workstation makes its software resistant to viruses and other harmful interference. The system shutdown occurs immediately and safe for the equipment and data.

Availability 7 and 3 colors imaging

Operator is free to choose whether to use 3 colours imaging (organics/inorganics/metals), which is familiar by experience, or 7 colours imaging, which is more detailed one and which enables material discrimination on effective atomic number more precisely. New colours help the operator to stay attentive and his/her perception to remain not “overloaded” when working during a long period of time. This improves the performance quality of the operator and a through-flow rate of inspection points


X-ray Baggage Scanner GS6550 Dimension Layout.png


X-ray Baggage Scanner Details.png

High Penetration

High Penetration.png


Image Reading & Constrast

Image Reading & Contrast.png

 Edge Reinforcement

Edge Reinforcement.png

Organic Hightlight Display

Organic Hight Display.png

Inverse Image Constrast

Inverse Image Constrast.png





Q : Are you manufacturer or trader?

A : We are manufacturer, we have our own factories in ShenZhen, we have independent department for purchasing, producing, processing, testing, packing, storing , and transportation, believe our team is best team in china.

 Q : Do you sell the accessories for Products ?

A : Yes. We have Match the parts for our testing equipment. If our machines damages by fire, water flood, earthquakes, unsteady of power and other natural disasters, we are willing supply match parts with lowest price for you.

 Q : What’s your main product?

A : Our main products are security X-ray luggage scanner, parking management system, parking guidance system, LPR system, walk through metal detector, Under Vehicle Scanning system, explosive trace detector, automatic bollard, road blocker, tire killer, turnstile, barrier gate etc.,we developed products have been granted by 28 national patents.

 Q : How about your after-sales policy?

A : Customer first is our always principle . All of our products normal warranty is 12months. We give necessary back or video guidance for daily problems. If massive products occur big quality problems. Our technical and engineer support overseas service . products have been granted by 28 national patents.

 Q : Do you accept customer Logo and customized ?

A : we accept kinds of customized and logo of all of our products for customers