The GS highway barriers also so called tollway barriers has designed a high speed barrier dedicated to toll applications, especially highways/motorways, here reliability, endurance and the correct technology to manage major vehicle flows is essential.
GS Highway barrier permits short opening and closing times without the barrier boom bouncing in the end positions. The lever system locks thebarrier boom at both end positions. In theevent of a power failure,the barrier arm can be fully opened or full closed as optional.
The complete drive system is attached to the barrier housing as a single unit, and can easily be removed from the housing by removing the mounting screws.A built in spring mechanism provides a precise counterbalance for the barrier boom. The springs are factory set to correspond with the boom length prior to delivery. If necessary, the springs can be easily reset in situ during assembly, for example if the barrier boom is shortened or if signs are attached to the boom.
Maximum boom length: 2500mm/3500mm Opening and closing time: 0.9s/1.2s/1.4s
Supply Voltage: 220V/230V Frequency: 50/60 Hz
Power consumption: 80W Rated rotary speed: 30 r/min
Rated torque: 20N·m Operation Noise: ≤60dB
Housing: width: 350 mm Depth: 350 mm
Height:1010mm Weight not including barrier boom: 55kg
Ambient Temperature: -40ºC～+75ºC Relative Humidity: 50％～90％
Atmospheric Pressure:86Kpa～106 Kpa
Adopts specially-designed AC220V torque motor. The maintenance-free motor is employed which might be stopped at any position and no damage will be caused. When it is located at the two ends the motor’s power shall be automatically reduced to 20W it may save the energy avoid the conditions of condensation and corrosion moreover it may normally work in cold season;
The driving unit employs sine generator on which the speed-down device is taken off to make the structure be more compact and reasonable; it greatly reduces the mechanical failures
The special wiring structure may help to avoid the instant heavy current and instant voltage fluctuation in the moment of electric connecting or breaking it may be directly powered by UPS and other equipments in the same power network may be normally worked.
The housing is made by the special steel board and it’s painted by the bisque or nacarat high class paint which may not only prevent corrupting but also may avoid fading for the ultraviolet radiation. Internal mechanical elements treated by electrogalvanisation.
Side door giving access to the mechanism, locked by key.
Aluminium tube boom arm, varnished white with red reflecting stripes and end-sealing.
Boom arm swing-off, avoiding damage to the barrier in case of impact on the boom arm.
Arm balancing by springs.
* Adjustable high-speed, stable, applied in the ETC non-stop charging system;
* Torque gear motor is used, keep the barrier stable when the motor operating in a low speed;
* Vehicle Anti-smash function: the boom will rise (a horizontal angle above 15°)automatically when a car enter the loop detecting area, to prevent the car from being smashed;
* Anti-collision function: there is a rotator used between the boom and axis. The boom will brake/rotate away when hit by car. The barrier will stand still and gets no harm.
* The boom can be uplifted manually on the occasion of power-cut and breakdown.
High speed of closing & open: 0.9second, 1.2second & 1.4second (optional)
Straight boom arm Max.length 3m;
Inclusive of arm×1 and push button×1 which opens/closes barrier
Optional housing color as yellow (default)/ orange / white / blue
Optional boom arm direction as leftward/rightward
high speed and 100% duty cycle operation with 5 million MTBF
Free-maintenance torque motor ensures 100% duty cycle operation with 5 million MTBF. The torque motor is environmentally friendly, energy-saving, and maintenance-free. No current shock and overheating while working, it protects the controller and prolong its lifetime. 0.8 second fastest open/close time for toll gate and parking lots wth high traffic flow.
Heavy-duty, weather-proof and simple-design housing
The housing adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading, conformed to the IP54 dustproof and waterproof. Simple design also decorates your premises.
Sine lever drive mechanism ensures smooth landing of boom without shaking
The patented precise casting sine lever drive mechanism enables the boom arm moves from slow to fast when it starts, and fast to slow when it stops. This will effectively reduce the shaking of the boom arm and allay the burden of the electrical motor, so that the lifetime of the motor and mechanical components will be greatly prolonged.
Boom to automatically open up fully or close down in case of power failure
If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical plane beyond 45 degree. If power failure occurs during boom opening, boom will automatically continue to open up fully if the angle between boom and level surface beyond 45 degrees.
Anti-collision protects boom arm (optional)
Anti-collision protects the boom arm not to be damaged once boom arm was collided by a vehicle.
Safety of "Anti-hit" ---Loop Detector
While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.
Safety of "Anti-hit"---Rebound Upon Obstacle
While moving down, boom arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.
Safety of "Anti-hit"----Infra Red (optional)
While moving down after vehicle passed, boom arm will immediately go back to vertical position once the IR transmission between the receiver and transmitter was blocked by a vehicle or person, which protects the vehicle or person not to be hit by boom arm.
Automatically close by Loop Detector (optional)
If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered
Automatically open by Loop Detector (optional)
If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered
If ‘open’ command keep working (by continuously pressing “open“ button) or RS485 command was set at always-open mode, the barrier will ignore all ‘close’ command and stay at the vertical position , unless the status changed.
Optional controlling way
There are three ways to control the barrier’s movement, namely, push button, remote-control and RS485 serial command.
Transparent plastic covers on Control Board
A transparent plastic covers on the Control Board to makes Control Board water proof and dust proof, also protects operator.
Anti-condensation in cold climate
The barrier remains low power consumption even without closing and opening input, which will keep the motor in normal temperature. The lubricant will not be frozen so that the barrier will keep working in frozen environment.
Theft and tamper resistant, no exterior mounting bolts.